Thermomechanics

Ziegler, Hans

doi:10.1090/qam/99737

Thermomechanics

Author: Hans Ziegler
Journal: Quart. Appl. Math. 30 (1972), 91-107
DOI: https://doi.org/10.1090/qam/99737
MathSciNet review: QAM99737
Full-text PDF Free Access

References | Additional Information

D. C. Drucker, H. J. Greenberg, and W. Prager, The safety factor of an elastic-plastic body in plane strain, J. Appl. Mech. 18 (1951), 371–378. MR 0051119
D. C. Drucker, W. Prager, and H. J. Greenberg, Extended limit design theorems for continuous media, Quart. Appl. Math. 9 (1952), 381–389. MR 45573, DOI https://doi.org/10.1090/S0033-569X-1952-45573-2

R. v. Mises, Mechanik der plastischen Formänderung von Kristallen, Z. angew. Math. Mech. 8, 161 (1928)

William Prager, An introduction to plasticity, Addison-Wesley Publishing Co., Inc., Reading, Mass.-London, 1959. MR 0105910
W. T. Koiter, Stress-strain relations, uniqueness and variational theorems for elastic-plastic materials with a singular yield surface, Quart. Appl. Math. 11 (1953), 350–354. MR 59769, DOI https://doi.org/10.1090/S0033-569X-1953-59769-7

D. C. Drucker and H. G. Hopkins, Combined concentrated and distributed load on ideally-plastic circular plates, in Proc. 2nd U. S. Nat. Congr. Applied Mech., Ann Arbor 1954, New York 1955, p. 517

D. C. Drucker, Limit analysis of cylindrical shells under axially-symmetric loading, in Proc. 1st Midwestern Conf. Solid Mech., Urbana, 1953, p. 158

R. M. Haythornthwaite and R. T. Shield, A note on the deformable region in a rigid-plastic structure, J. Mech. Phys. Solids 6 (1958), 127–131. MR 92466, DOI https://doi.org/10.1016/0022-5096%2858%2990020-6
P. G. Hodge Jr., Rigid-plastic analysis of symmetrically loaded cylindrical shells, J. Appl. Mech. 21 (1954), 336–342. MR 0069015
H. G. Hopkins and W. Prager, The load carrying capacities of circular plates, J. Mech. Phys. Solids 2 (1953), 1–13. MR 57735, DOI https://doi.org/10.1016/0022-5096%2853%2990022-2
H. G. Hopkins and A. J. Wang, Load-carrying capacities for circular plates of perfectly-plastic material with arbitrary yield condition, J. Mech. Phys. Solids 3 (1955), 117–129. MR 66912, DOI https://doi.org/10.1016/0022-5096%2855%2990055-7
H. G. Hopkins, On the plastic theory of plates, Proc. Roy. Soc. London Ser. A 241 (1957), 153–179. MR 87363, DOI https://doi.org/10.1098/rspa.1957.0120
H. Geoffrey Hopkins and William Prager, On the dynamics of plastic circular plates, Z. Angew. Math. Phys. 5 (1954), 317–330. MR 66910, DOI https://doi.org/10.1007/BF01587827

E. H. Lee and P. S. Symonds, Large plastic deformation of beams under transverse impact, J. Appl. Mech. 19, 308 (1952)

E. T. Onat and W. Prager, Limit analysis of arches, J. Mech. Phys. Solids 1 (1953), 77–89. MR 52967, DOI https://doi.org/10.1016/0022-5096%2853%2990012-X

E. T. Onat and W. Prager, The influence of axial forces on the collapse load of frames, in Proc. 1st Midwestern Conf. Solid Mechanics, Urbana, 1953, p. 40

E. T. Onat, The plastic collapse of cylindrical shells under axially symmetrical loading, Quart. Appl. Math. 13 (1955), 63–72. MR 69016, DOI https://doi.org/10.1090/S0033-569X-1955-69016-1
E. T. Onat and W. Prager, Limit analysis of shells of revolution. I, Nederl. Akad. Wetensch. Proc. Ser. B. 57 (1954), 534–548. MR 0066913
W. H. Pell and W. Prager, Limit design of plates, Proceedings of the First U. S. National Congress of Applied Mechanics, Chicago, 1951, The American Society of Mechanical Engineers, New York, N. Y., 1952, pp. 547–550. MR 0054505
Walter Schumann, On limit analysis of plates, Quart. Appl. Math. 16 (1958), 61–71. MR 102256, DOI https://doi.org/10.1090/S0033-569X-1958-0102256-1
A. J. Wang and H. G. Hopkins, On the plastic deformation of built-in circular plates under impulsive load, J. Mech. Phys. Solids 3 (1954), 22–37. MR 66911, DOI https://doi.org/10.1016/0022-5096%2854%2990036-8

A. J. Wang, The permanent deflection of a plastic plate under blast loading, J. Appl. Mech. 22, 357 (1955)

Hans Ziegler, On the theory of the plastic potential, Quart. Appl. Math. 19 (1961), 39–44. MR 122161, DOI https://doi.org/10.1090/S0033-569X-1961-0122161-0
D. C. Drucker, A more fundamental approach to plastic stress-strain relations, Proceedings of the First U. S. National Congress of Applied Mechanics, Chicago, 1951, The American Society of Mechanical Engineers, New York, N. Y., 1952, pp. 487–491. MR 0054502
Geoffrey Taylor, A connexion between the criterion of yield and the strain ratio relationship in plastic solids, Proc. Roy. Soc. London Ser. A 191 (1947), 441–446. MR 22519, DOI https://doi.org/10.1098/rspa.1947.0126
R. Hill, A variational principle of maximum plastic work in classical plasticity, Quart. J. Mech. Appl. Math. 1 (1948), 18–28. MR 25384, DOI https://doi.org/10.1093/qjmam/1.1.18
J. F. W. Bishop and R. Hill, A theory of the plastic distortion of a polycrystalline aggregate under combined stresses, Philos. Mag. (7) 42 (1951), 414–427. MR 41691

J. Kestin and J. R. Rice, Paradoxes in the application of thermodynamics to strained solids, in A critical review of thermodynamics, Mono Book, Baltimore, 1970

J. R. Rice, Inelastic constitutive relations for solids: an internal variable theory and its application to metal plasticity, Brown University Report N00014-67-A-0191-0003/12, Providence.

L. Onsager, Reciprocal relations in irreversible processes, Phys. Rev. 37 (II), 405 (1931) and 38 (II), 2265 (1931)

M. A. Biot, Theory of stress-strain relations in anisotropic viscoelasticity and relaxation, J. Appl. Phys. 25, 1385 (1954)

M. A. Biot, Variational principles in irreversible thermodynamics with application to viscoelasticity, Phys. Rev. (2) 97 (1955), 1463–1469. MR 70514
M. A. Biot, Thermoelasticity and irreversible thermodynamics, J. Appl. Phys. 27 (1956), 240–253. MR 77441
T. Alfrey, Non-homogeneous stresses in visco-elastic media, Quart. Appl. Math. 2 (1944), 113–119. MR 10499, DOI https://doi.org/10.1090/S0033-569X-1944-10499-X
N. J. Hoff, Approximate analysis of structures in the presence of moderately large creep deformations, Quart. Appl. Math. 12 (1954), 49–55. MR 61004, DOI https://doi.org/10.1090/S0033-569X-1954-61004-X

H. Ziegler, A possible generalization of Onsager’s theory, in H. Parkus and L. I. Sedov, editors, IUTAM symp. on irreversible aspects of continuum mechanics, Vienna, Springer, Vienna, 1968, p. 411

Hans Ziegler, An attempt to generalize Onsager’s principle, and its significance for rheological problems, Z. Angew. Math. Phys. 9b (1958), 748–763. MR 94943, DOI https://doi.org/10.1007/BF02424793

H. Ziegler, Proof of an orthogonality principle in irreversible thermodynamics, Z. angew. Math. Phys. 21, 853 (1970)

J. W. Gibbs, Elementary principles in statistical mechanics, in The collected works, Yale Univ. Press, New Haven, 1948, vol. II

H. Ziegler and L. K. Yu, Incompressible Reiner-Rivlin fluids obeying the orthogonality condition, Ing. Arch. 41 (1972), at press

L. K. Yu, Further applications of the orthogonality principle to incompressible Reiner-Rivlin fluids, Ing. Arch. 41 (1971), at press

H. Ziegler, Systems with internal parameters obeying the othogonality condition, Z. angew. Math. Phys. 23 (1972), at press

S. R. DeGroot, Thermodynamics of irreversible processes, North-Holland, Amsterdam 1952, p. 196

H. Ziegler, Zwei Extremalprinzipien der irreversiblen Thermodynamik, Ing.-Arch. 30 (1961), 410–416 (German). MR 134717
Hans Ziegler, Die statistischen Grundlagen der irreversiblen Thermodynamik, Ing.-Arch. 31 (1962), 317–342 (German). MR 153414
Hans Ziegler, Some extremum principles in irreversible thermodynamics with application to continuum mechanics, Progress in Solid Mechanics, Vol. IV, North-Holland, Amsterdam, 1963, pp. 91–193. MR 0163470

H. Ziegler, Thermodynamic considerations in continuum mechanics, The 1964 Minta Martin Lecture, MIT and AIAA (1964)

H. Ziegler, Thermodynamik der Deformationen, in Proc. 11th Congr. Appl. Mech. Munich 1964, Springer, Berlin 1966, p. 99

W. Traupel, Die Grundlagen der Thermodynamik, Braun, Karlsruhe 1971, p. 9

Walter Noll, On the continuity of the solid and fluid states, J. Rational Mech. Anal. 4 (1955), 3–81. MR 67670, DOI https://doi.org/10.1512/iumj.1955.4.54001
M. Reiner, A mathematical theory of dilatancy, Amer. J. Math. 67 (1945), 350–362. MR 12594, DOI https://doi.org/10.2307/2371950
R. S. Rivlin, The hydrodynamics of non-Newtonian fluids. I, Proc. Roy. Soc. London Ser. A 193 (1948), 260–281. MR 25847, DOI https://doi.org/10.1098/rspa.1948.0044

K. Weissenberg, A continuum theory of rheological phenomena, Nature 159, 310 (1947)

A. E. Green and R. S. Rivlin, Steady flow of non-Newtonian fluids through tubes, Quart. Appl. Math. 14 (1956), 299–308. MR 90335, DOI https://doi.org/10.1090/S0033-569X-1956-90335-4
Arnold Sommerfeld, Thermodynamik und Statistik, Dieterich’sche Verlagsbuchhandlung, Wiesbaden, 1953 (German). Herausgegeben von F. Bopp und J. Meixner. MR 0062030
R. H. Fowler, Statistical mechanics, Cambridge University Press, Cambridge-New York, 1980. The theory of the properties of matter in equilibrium; Reprint of the second edition of 1936. MR 643100